Solutions by industry

Oil, Gas & Petrochemical — Switchgear & Control Panels in the UAE

For the UAE's oil, gas and petrochemical sector, Al Misbah Al Sehri manufactures robust safe-area LV switchgear in Dubai — heavy-duty MDB and SMDB distribution boards, motor control centres (MCC), ATS panels and APFC capacitor banks for plant rooms, pump houses, utilities and substations. Panels are built to IEC 61439 and ADDC-suitable practice with high breaking-capacity ABB, Schneider, Siemens and Eaton components, plus Multispan motor-protection relays and metering.

UAE oil, gas and petrochemical operators — across Abu Dhabi's western region, Jebel Ali, tank farms and coastal support bases — depend on dependable safe-area power for pump houses, compressor utilities, substations, control rooms and admin buildings. We engineer each panel to your single-line diagram, matching breaking capacity to the site's prospective fault level and specifying corrosion-resistant, IP-rated enclosures for dusty, humid, salt-laden conditions. As a Dubai manufacturer we control lead time, wiring quality and routine testing, and supply genuine multi-brand components alongside our Multispan distributorship. That gives you one accountable source for the board, its protection relays and its metering — built to IEC 61439 and ADDC-suitable practice, delivered across all seven emirates and the GCC.

What we supply for Oil, Gas & Petrochemical

Heavy-duty MDB, SMDB and motor control centres (MCC) to IEC 61439 with DOL, star-delta, soft-starter and VFD feeders
ATS panels with bypass switch for seamless mains-to-generator changeover on critical loads
APFC capacitor banks with staged switching, detuned reactors where needed and PF regulators
High breaking-capacity ACBs, MCCBs, contactors and isolators from ABB, Schneider, Siemens and Eaton
Multispan motor and supply protection: VPR-22U voltage/phase relay, SVR-22U, SPP-22 preventer, OLR-50100 overload and MPD-192 motor protection
Multispan metering, PS24-series SMPS, WLC-22/WLC-35 water-level controllers and MS-5716RU data loggers for utility monitoring

Typical electrical & control needs

High prospective short-circuit levels near plant substations demanding 50-100 kA breaking capacity, fully rated busbars and correct cascade/discrimination
Reliable protection for firewater, cooling-water, transfer and process motors against overload, phase loss, phase reversal and under/over-voltage
Automatic changeover to standby generation for safety-critical loads such as firewater pumps, emergency lighting and control/UPS rooms
Power factor correction to cut DEWA/ADDC demand charges and stabilise voltage on large motor-driven loads
Corrosion, dust and heat protection for harsh plant-room and coastal environments — IP-rated, powder-coated or stainless enclosures
Continuous monitoring of currents, voltages, energy, temperature and tank/sump levels across utility systems

Switchgear manufacturing Multispan instruments Electrical components Request a quote

FAQ

Oil, Gas & Petrochemical panels in the UAE

Do you build control panels for oil, gas and petrochemical plants in the UAE?

Yes. We manufacture safe-area low-voltage switchgear in Dubai for the sector — heavy-duty MDB and SMDB distribution boards, motor control centres, ATS panels and APFC capacitor banks for plant rooms, pump houses, compressor utilities, substations and control buildings. Each panel is engineered to your single-line diagram to IEC 61439 and ADDC-suitable practice and delivered across all seven emirates and the GCC.

Can your panels handle the high fault levels found near plant substations?

Yes. Close to transformers and generation, prospective short-circuit current is high, so we specify high breaking-capacity ACBs and MCCBs — typically 50 to 100 kA — from ABB, Schneider, Siemens or Eaton, with fully rated copper busbars and correct cascade and discrimination. The exact rating is confirmed against your fault-level study before we build.

Do you supply equipment for hazardous (Zone 1/2) areas?

Our switchgear is built for safe, non-hazardous areas — plant rooms, substations, utility and control buildings. Certified Ex (ATEX/IECEx) equipment is required inside classified Zone 1/2 areas; we can advise on scope and supply the safe-area distribution boards, MCC and utility panels that feed and surround those zones.

Which Multispan devices suit oil and gas utility motors and pumps?

For firewater, cooling-water, transfer and process pump motors we fit Multispan protection: the VPR-22U voltage and phase-failure relay, SVR-22U, SPP-22 single-phase preventer, OLR-50100 electronic overload and MPD-192 motor protection relay, plus WLC-22/WLC-35 level controllers and panel metering for utility monitoring.

Need a Multispan part or a custom panel?

Send us a model number or your requirement — our team responds fast with genuine stock, pricing and lead times across the UAE & GCC.

Request a Quote WhatsApp us